1.  Product Line Ex:
     RD - Rotary Potentiometer


2.  Models

8.  Bushing Length


9.  Shaft Length


10.  Types of Shaft

3.  Number of Unit:

Code	Number of shaft/unit	Code	Number of shaft/unit
1	Single Shaft, Single Unit	A	Dual shaft, Single Unit
2	Single Shaft, Dual Unit	B	Dual Shaft, Dual Unit
3	Single Shaft, Triple Unit	C	Dual Shaft, Triple Unit
4	Single Shaft, Quad Unit	D	Dual Shaft, Quad Unit
5	Single Shaft, 5-Unit	E	Dual Shaft, 5-Unit
6	Single Shaft, 6-Unit	F	Dual Shaft, 5-Unit (push)
		L	Dual Shaft, 5-Unit (pull/lock)

11.  Axis angle of shaft (in full  c.c.w. position)


12.  Pattern of Resistance Value

4.  With Switch or Without Switch  / Position of Switch

Code	Switch Position
Dummy	Without Switch
W	With Switch / on right-hand
S	With Switch / on left-hand

13.  Resistance Value



14.  Method for manufacturing Shaft & Bushing

Code	Methods
0	Die-Casting
1	Lathed

5.  Position of Tap:

Code	Description
T	Tap locates on the top of PC board
R	Tap locates on the right-hand side of PC board
L	Tap locates on the right-hand side of PC board

6.  Type of Bushing

Code	Description
10	Solder lug; H = 10.4 mm type
20	PC board (horizontal); H = 12.5 mm type
22	PC board (horizontal); H = 14.5 mm type
2A	PC board (horizontal); H = 10.5 mm type

15.  Number of Click


16.  Serial No.

7.  Kinds of Bushing

Code	Standard	Code	Standard
A	M6 x 0.75	D	3/8 - 32 UNEF
B	M7 x 0.75	E	M9 x 0.75
C	M8 x 0.75	F	M10 x 1.0

 Top

ISL Products International Ltd.
   235-P Robbins Lane, Suite 270
   Syosset, NY 11791

Toll free - (888) 904-9054 | email: info@islproducts.com